We have incorporated a variety of features to make assembly easier, safer and provide you with an assortment of spring placements. The bed ends are constructed of 1-1/2" x 1-1/2" 15-gauge steel vertical up rights with three 3/4" x 1-1/2" cross support bars. The up-right posts have been routed out and equipped with recessed hook pins. The bed spring hook plates have been configured with three inch center to center hooks and hook to the bed end internally in the upright post. There is a through hole on the upper most height to facilitate the insertion of a 1/4" carriage bolt (not supplied) to act as a safety lock when stacked in the top bunk position. Specially designed high impact plastic inserts are installed in the bedpost to act as both floor glides and to allow for stacking, to create bunk beds without the need of additional stacking parts or tools. The Claremont bed offers you three heights positions to locate your spring.

Spring Construction: The spring surface is made up of 15 rows of 9-gauge sinuous spring wire with "Z" hooks on each end. There are five rows of 12-gauge connecting links between each row of sinuous springs for a total of seventy-five links. There are five 12-gauge helical springs, with 16 turns and is 3/4" in diameter, supporting the sinuous wire to each end of the tubular spring frame. All spring components are inserted inside the tubular frame leaving it both tamper-proof and free of sharp edges. Each spring is supplied with two lateral cross braces that are one inch square.

Metal Finish: The complete spring units are washed, phosphated, and non-chromic sealed in six stages. They are then dried and electrostatically powder coated with hybrid dry powder and baked at 400 degrees. Metal color is textured black.

Powder-Coated
Adjustable Spring Height
Convertible Single or Bunk
No additional adapters required to bunk
All Bed Ends Are Identical
US Made
Easy to Assemble
Tools Required: One Rubber Mallet