|
|
|
|
|
|
Camp Mattress Cloth Cover
|
|
|
Available in standard 3", 4", and 5" thickness for camp (poly-core/foam) mattresses.
Constructed with fire retardant spun polyester cloth. The spun-polyester is finished to conform to MVSS-302 flammability standards. Covers are washable in cold water and tumbled dry on a delicate setting.
Anti-bacterial
Anti-static
Fire-resistant
Nylon chain
Now with nylon zipper and slide to prevent corrosion.
Available in any size, email for special size pricing.
|
|
|
|
|
|
|
|
|
|
Innerspring Cloth Mattress Cover
|
|
|
Cloth Zippered Covers are constructed with fire retardant spun polyester cloth, with heavy duty zipper around one end and part way down each side. This allows for the cover to be easily put on. The zipper is placed so not to interfere with either sleeping surface, and the new material has no loose threads to get caught in the zipper. The spun-polyester is finished to conform to MVSS-302 flammability standards. The Covers are washable in cold water and tumbled dry on a delicate setting. The cover is constructed with all seams inverted with the exception of the zipper area. The encasement method of construction results in a negative environment for bed bugs.
Helpful Hints: The Cloth Zippered Replacement Covers for inner spring mattress are relativity easy to put on. We suggest that two people work together to apply the mattress cover. First make sure that the cover you have fits the mattress you are covering. We try to band same sizes together when various sizes are order. Next: slip the cover part way on to the end of the mattress. Make sure you are putting the cover on square; they are very difficult to adjust if you put them on cock-eyed. With one person standing on each side of the mattress each one should grab the cover at the open mouth but below where the zipper starts and stops. Lift the mattress into a vertical position and "shuck" the mattress into the cover. If you pull on one of the open flaps of the cover you will rip the stitching apart where the zipper start and stops (this is the weakest and most venerable point in your cover's life.) Finish by closing the open mouth over the end of the mattress and zipping up.
We are sure that the above helpful hints will make it easier to put on and maintain your covers in the future.
For custom sizes, please email or call.
|
|
|
|
|
|
|
|
|
|
Camp Mattress Vinyl Cover
|
|
|
Available in standard 3", 4", and 5" thickness for camp (poly-core/foam) mattresses.
Made with 11 oz. per square yard laminate ticking, triple coated with Dupont vinyl resin compound, non-skid embossing.
Anti-bacterial
Waterproof
Anti-static
Fire-resistant
Stain-resistant
Nylon chain
Now with nylon zipper and slide to prevent corrosion.
Available in any size, email for special size pricing.
|
|
|
|
|
|
|
|
|
|
Innerspring Vinyl Mattress Cover
|
|
|
Vinyl Mattress Covers are constructed of 11 ounce per square yard of triple layered reinforced vinyl laminate. The covers are constructed with a heavy duty nylon zipper around one end and part way down both sides. This allows the cover to be easily put on. The zipper is placed so as not to interfere with either sleeping surface. The nylon zipper and slide will prevent corrosion. The cover is constructed with all seams inverted with the exception of the zipper area. The encasement method of construction results in a negative environment for bed bugs. Our covers are designed to wear like iron and to last years. Fire retardant vinyl laminate cover meets durable flame resistance requirements prescribed by method 5903 in the Federal Specification CCCT-191.
Helpful Hints: The Zippered Replacement Cover for innerspring mattress are relatively easy to put on. We suggest that two people work together to apply the mattress cover. First make sure that the cover you have fits the mattress you are covering. We try to band same sizes together when various sizes are order. Next: slip the cover part way on to the end of the mattress. Make sure you are putting the cover on square; they are very difficult to adjust if you put them on cock-eyed. With one person standing on each side of the mattress each one should grab the cover at the open mouth but below where the zipper starts and stops. Lift the mattress into a vertical position and "shuck" the mattress into the cover. If you pull on one of the open flaps of the cover you will rip the stitching apart where the zipper start and stops (this is the weakest and most venerable point in your cover's life.) Finish by closing the open mouth over the end of the mattress and zipping up.
Bourdons covers are heavy enough so that we are sure you will not take them off to wash them in a machine, therefore, when the cover is place close the zipper and put a spot of super glue behind the slide. This will prevent the cover from being removed with out authorization, and will eliminate a place to hide contraband (candy bars, crackers, magazines etc.)
When cleaning a Bourdons cover we suggest that you use a liquid anti-bacterial soap. Using bleach continuously will dry out the vinyl, whether it is Bourdons or any other manufacturer.
We are sure that the above helpful hints will make it easier to put on and maintain your covers in the future.
For custom sizes, please email or call.
|
|
|
|
|
|
|
|
|
|
Innerspring Nylon Mattress Cover
|
|
|
The Nylon Zippered Replacement Cover is fabricated with 210-denier nylon that has a urethane coating applied to the under side. The cover is waterproof and constructed with all seams inverted with the exception of the zipper area. The encasement method of construction results in a negative environment for bed bugs.
Features: Anti-bacterial, Waterproof, Anti-static, Fire-resistant, Stain-resistance, Nylon chain
Now with nylon zipper and slide to prevent corrosion.
Helpful Hints: The Nylon Zippered Replacement Cover for inner spring mattress are relativity easy to put on. We suggest that two people work together to apply the mattress cover. First make sure that the cover you have fits the mattress you are covering. We try to band same sizes together when various sizes are order. Next: slip the cover part way on to the end of the mattress. Make sure you are putting the cover on square; they are very difficult to adjust if you put them on cock-eyed. With one person standing on each side of the mattress each one should grab the cover at the open mouth but below where the zipper starts and stops. Lift the mattress into a vertical position and "shuck" the mattress into the cover. If you pull on one of the open flaps of the cover you will rip the stitching apart where the zipper start and stops (this is the weakest and most venerable point in your cover's life.) Finish by closing the open mouth over the end of the mattress and zipping up.
Bourdons covers are heavy enough so that we are sure you will not take them off to wash them in a machine, therefore, when the cover is place close the zipper and put a spot of super glue behind the slide. This will prevent the cover from being removed with out authorization, and will eliminate a place to hid contraband (candy bars, crackers, magazines etc.).
When cleaning a Bourdons cover we suggest that you use a liquid anti-bacterial soap. Please do not use bleach as this will dry the material out.
We are sure that the above helpful hints will make it easier to put on and maintain your covers in the future.
For custom sizes, please email or call.
|
|
|
|
|
|
|
|
|
|
Camp Mattress Nylon Cover
|
|
|
Available in standard 3", 4", and 5" thickness for camp (poly-core/foam) mattresses.
Constructed with 210-denier nylon that has a urethane coating applied to the under side. Anti-bacterial
Waterproof
Anti-static
Fire-resistant
Stain-resistance
Nylon chain
Now with nylon zipper and slide to prevent corrosion.
Available in any size, email for special size pricing.
|
|
|
|
